ARRI WRC-1 Manuel d'utilisateur télécharger pdf (Page 17)

4. Setup

4.1 WRC-1 in wireless mode

In order to be able to use the WRC-1 in wireless mode, it

must be mounted on a Wireless Main Unit (WMU-1). The

Wireless Main Unit supplies the WRC-1 with power and

establishes the radio link with the camera.

An Universal Motor Controller (UMC-1) with an Universal

Radio Module (URM-1) must be mounted on the camera.

The UMC-1 and the URM-1 establish the radio link

outgoing from the camera. A Lens Control Motor CLM-2

for controlling the iris can be connected to the Universal

Motor Controller UMC-1.

For details about setting up the LCS components, refer

also to the LCS instruction manual.

Note: In order to operate the WRC-1 the following

EPROM versions must be used:

WMU-1: 01.50 or higher

UMC-1: 01.50 or higher

ARRIFLEX 435 2.4 or higher

Please contact your nearest ARRI dealer or one of the

service stations to update the EPROMs or to acquire the

latest software version.

Required system components:

WRC-1 .................................................... K2.52087.0

WMU-1 ................................................... K2.52052.0

with WBU-2 battery .................................. K2.52088.0

WAC-1 charger ........................................ K2.52072.0

UMC-1 .................................................... K2.52040.0

with UC-C1 cable [K2.52046.0 as replacement]

dovetail adapter ....................................... K2.52080.0

URM-1 ..................................................... K2.52048.0

UC-R1 cable............................................. K2.52079.0

for iris control additionally

CLM-2 ..................................................... K2.52036.0

possibly with console................................. K2.52035.0

Note: CLM-1 motors cannot be used

as iris motors for the WRC-1!

Setup

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 195 196

Pas de commentaire

ARRI WRC-1 Manuel d'utilisateur Page 17